SmartFix Tool Official website
The SSTR/MInst/Portable/Antivirus folder is pacifiers instead of SmartFix Tool.
Need to download the latest version and replace the pacifiers.
You can also upgrade from WinPE if you have an Internet connection.
Kaspersky Rescue Disk 2018 – Download from the official site and unzip the ISO image to a folder Linux/krd2018 оn the USB Drive.
Kaspersky Rescue Disk 2018
Dr.Web LiveDisk – Download ISO image from the official site and unpack to a folder on a USB flash drive Linux/DrWeb.
Dr.Web LiveDisk
Dr.Web CureIt! and Kaspersky Virus Removal Tool
In the SSTR/MInst/Portable/Antivirus folder instead of Dr.Web CureIt! and Kaspersky Virus Removal Tool are empty.
Download the latest version from the official site and put it into the SSTR/MInst/Portable/Antivirus folder
instead of blank (replace) Start from the Start menu
You can always download the latest versions here:
Dr.Web CureIt!
Kaspersky Virus Removal Tool
If you have a network, the current versions can be downloaded and run under WinPE, which has the appropriate shortcuts in the Start menu.
Adding Linux ISO images:
This will work in both BIOS and UEFI mode
In BIOS mode in the boot menu, you need to go to the Grub4Dos menu (down arrow)
In EFI mode, the default Microsoft standard EFI boot loader is used.
You must manually switch the bootloader to GRUB2
To expand functionality when booting in UEFI mode, you can switch to the GRUB2 bootloader.
However, booting with Secure Boot enabled on all computers is not guaranteed.
Switch between EFI loaders Microsoft or GRUB2, you need to run the batch file on a flash drive in the EFI/boot folder
_MICROSOFT_EFI.bat – switches to the Microsoft bootloader
_GRUB2_EFI.bat – switches to GRUB2 bootloader
You can always see which boot loader is active by file in the EFI/boot folder
[MICROSOFT_MODE] – Microsoft loaders are active
[GRUB2_MODE] – GRUB2 boot loaders are active
When using the GRUB2 boot loader in EFI, you can add Acronis True Image 2018/2019/2020, Acronis Disk Director 12, Kaspersky Rescue Disk 2018, Сlonezilla, and TeraByte Image for Linux, Parted Magic, Ubuntu Desktop amd64. (download both in UEFI and BIOS)
Note: For Acronis True Image, it is not necessary to extract the entire ISO image. It is now large in size and will be
take up a lot of space.
For the x64 version, just extract the files from the ISO image to the folders below:
dat10.dat, dat11.dat and dat12.dat
Acronis True Image 2024
Unpack the ISO image into a folder on the USB flash drive
Linux/Acronis2024
Acronis True Image 2021
Unpack the ISO image into a folder on the USB flash drive
Linux/Acronis2021
Acronis True Image 2020
Unpack the ISO image into a folder on the USB flash drive
Linux/Acronis2020
Acronis True Image 2019
Unpack the ISO image into a folder on the USB flash drive
Linux/Acronis2019
Acronis True Image 2018
Unpack the ISO image into a folder on the USB flash drive
Linux/Acronis2018
Acronis Disk Director 12
Unpack the ISO image into a folder on the USB flash drive
Linux/ADD12
Kaspersky Rescue Disk 2018
Download ISO image from the official site http://rescuedisk.kaspersky-labs.com/updatable/2018/krd.iso
and unpack the image to the Linux/krd2018 folder on the USB flash drive.
Parted Magic 2020
ISO image rename in pmagic.iso and copy the folder
Linux/pmagic
Ubuntu Desktop amd64
Unpack the ISO image into a folder on the USB flash drive
Linux/ubuntu
Clonezilla
Download ISO image from official site, rename it to clonezilla.iso and copy ISO image to folder
Linux/clonezilla32 or Linux/clonezilla64 according to the size of the image.
TeraByte Image for Linux
Unpack the ISO image, respectively, the bit depth in the folder on the USB flash drive
Linux/TeraByteImageLinux32 or Linux/TeraByteImageLinux64
Network:
Supported methods and protocols: TCP/IP, NetBIOS, PPPoE, and WLAN (Wi-Fi), WebDAV.
If you want use Wi-Fi – you need to install “wireless network-adapter driver”. Choose “Drivers” section in the “Start Menu”.
Connecting to Wi-Fi require to use “PE Network Manger”, click on tab “Wi-Fi” on it.
Importing WLAN profiles:
To import WLAN profiles on your computer or client computer, export the WLAN profile (s)
(you can immediately go to the SSTR\WLANProfile folder) program Marat Galiullina Smart WiFi Solution (available in the archive)
Or by means of Windows (Command line launch – PCM – On behalf of the administrator.)
Command example:
netsh wlan export profile key=clear folder= С:\WLANProfile
WLAN profiles put in a folder on your USB flash drive SSTR\WLANProfile
The number of profiles does not matter.
After loading WinPE, WLAN drivers will be installed and WLAN profiles imported. You will only need to select the necessary network in the PENetwork program, and click – Connect
You can also import manually after downloading, from the shortcut on the Desktop, or the Start menu, after installing the Wlan driver.
Connecting network drives:
When connecting a network disk through the Windows Explorer interface, i.e. through the standard window when calling the command – Connect network disk, in the User name field, it is necessary to write data in the following format
computer name/username, not just username.
or
IP address/username, not just username
Example:
STRELEC-PC\SEREGA
or
192.168.0.100\SEREGA
This is due to the peculiarities and limitations of Windows Explorer working from a system account
The recommended method, from the command line (.som, .bat file), using the net.exe utility
In this option, the connection is much faster.
The command parameters in this variant are standard.
Example:
net use Z: \\STRELEC-PC\share /USER:serega strelec
or
net use Z: \\192.168.0.100\share /USER:serega strelec
where
192.168.0.100\share – address.
serega – username
strelec – password
When connecting from the Administrator account, the settings in both options are standard.
Booting in UEFI
In EFI mode, the default Microsoft standard EFI boot loader is used.
To expand functionality when booting in UEFI mode, you can switch to the GRUB2 bootloader.
However, booting with Secure Boot enabled on all computers is not guaranteed. So it’s better to turn it off
When booting from GRUB2, there are memory checking utilities and you can also add various
Linux images.
Switch between EFI loaders Microsoft or GRUB2, you need to run the batch file on a flash drive in the EFI/boot folder
_MICROSOFT_EFI.bat – switches to the Microsoft bootloader
_GRUB2_EFI.bat – switches to GRUB2 bootloader
You can always see which boot loader is active by file in the EFI/boot folder
[MICROSOFT_MODE] – Microsoft loaders are active
[GRUB2_MODE] – GRUB2 boot loaders are active
I do not have a flash drive, how do I quickly boot from my computer hard drive?:
No problem! To boot quickly from your computer hard drive:
Download WinPE ISO Image
Extract the SSTR folder from the ISO image to the root of any disk / partition, it is better, of course, not the system one.
Run the file in the SSTR folder
Boot_x64_WinPE.cmd – for loading WinPE x64 (run as Administrator)
The computer will automatically reboot to WinPE.
After rebooting from WinPE, the computer will boot normally
After normal PC boot, remove WinPE boot entry from BCD by running the file
BCD_recovery.cmd (run as Administrator)
or manually uninstall with BOOTICE
Possible applications:
For example, remote support.
The client only needs to download the image, extract the SSTR folder and start the batch file.
And you already have to remotely connect to the PC.
For beginners: if you are reinstalling Windows, you do not need to do anything with the BCD.
It’s already new there.
Drivers:
This method is designed to install controller drivers if WinPE does not have the necessary WLAN drivers, network drivers, etc.
Note: This method is not intended for installing volumetric drivers, video, etc.
Drivers must be unpacked, i.e. * .sys driver, * .cat security directory, and * .inf file
In order for your drivers to install when WinPE10 boots up, place them on your bootable USB flash drive in the SSTR/USER/MY_DRIVERS_x64
Subfolders are allowed.
Replacement of desktop pictures:
If you want to change the image of the desktop, you must put your picture in the SSTR\MInst\Wallpaper folder to replace the existing Wallpaper.jpg under the same name (that is, replace its)
Windows Installation:
¿Algo que Comentar?